Home > News > Content

Full Automatic PET Blow Molding Machine Features

Sep 08, 2017

1, each heating zone has independent temperature control; the lamp, the reflector position and distance of each heating zone can be different according to the different shape of the preform, the size of the adjustment to achieve the best heating effect.


2, the use of constant pressure thermostat way to control the infrared lamp heating of the preform to ensure that the value of preform heating, accurate and stable, not affected by changes in input voltage.


3, the automatic blow molding machine according to the needs of different products can be supporting double-cavity double stretch cylinder, three-cavity three stretch cylinder, four-cavity four stretch cylinder or six cavity six stretch cylinder design, function can be adjusted the use of single-cavity single stretch cylinder to accommodate the different request of the transfer machine or test mode.


4, the control system has the function of automatic self diagnostic; when the operation is wrong or failure, the computer will display and issue an alarm.


5, mold replacement is very convenient, in the corresponding machine within the scope of the mold can automatically adjust the thickness of the die.


6, the automatic blow molding machine is suitable for blowing 30 ml -5 liters of cold or hot filling PET bottles.


7, the production process all automation, you can also support more than one machine to the automatic production line, the entire production process without manual contact with preforms or bottles