HDPE pipe fitting injection machine This pipe fitting injection machine can use HDPE raw materials to produce plastic pipe fittings (e.g. Elbow、Coupling and Union) HDPE is known for its large strength-to-density ratio. The density of HDPE can range from 0.93 to 0.97 g/cm3 or 970 kg/m3. Although...
HDPE pipe fitting injection machine
This pipe fitting injection machine can use HDPE raw materials to produce plastic pipe fittings (e.g. Elbow、Coupling and Union)
HDPE is known for its large strength-to-density ratio. The density of HDPE can range from 0.93 to 0.97 g/cm3 or 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/ 248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler-Natta catalysts) and reaction conditions.
Max. clamping force:5500KN
Space between tie bars:810*810mm
Many step control for speed and pressure of clamping and opening
Double injection cylinder device featured compact construction and good equilibrant
Variable displacement oil pump for energy-saving system
Change electricity system as per client’s local power system
Emergency stop device
SCREW L/D RATIO
THEORETICAL SHOT VOLUME
THEORETICAL INJECTION RATE (PS)
MAX.SCREW ROTATE SPEED
SPACE BETWEEN TIE BARS
PUMP MOTOR POWER
OIL TANK CAPACITY
Welcome contact us for more details and professional services.