Automatic PVC PPR pipe fitting injection molding machine.
Description
SHEN ZHOU Automatic PVC PPR pipe fitting injection molding machine.five-step mold closing, four-step mold opening; two-step carriage forward or retracting 5-point twin toggle clamping system by modular optimization software designing.Strong clamping with rapid and stable, to meet the strict clamping .
Specification
Screw diameter | mm | 60 | 65 | 70 |
Screw L/D ratio | L/D | 22.7 | 21 | 19.5 |
Shot weight | gram | 772 | 905 | 1050 |
Injection capacity | cm3 | 848 | 995 | 1154 |
Injection pressure | Mpa | 207 | 176 | 152 |
Theoretical injection rate | g/s | 241 | 281 | 328 |
Plastic capacity | g/s | 35.2 | 43.3 | 51.8 |
Injection stroke | mm | 300 | ||
Screw torque | N.m | 2530 | ||
Max screw rotate speed | r/min | 150 | ||
Clamping force | ton | 300 | ||
Opening stroke | mm | 590 | ||
Space between Columns | mm | 610×610 | ||
Mould height | mm | 220~630 | ||
Max daylight | mm | 1220 | ||
Picture
Advantages
Precise: high mechanical structure with high performance controller, greatly increase machine service life and precise.
High Efficiency: high optimistic claming unit, high speed mold close and mold open more smoothly, greatly shorten cycle time.
Safety: comply with the latest national safety standard, more safety and stability.
Features
1. PVC Pipe Fitting Injection Molding Machine equipped with hydraulic protection
2. Automatic Fitting Injection Molding Machine equipped with Hydraulic pulling device
3. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.
4. the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
5. The machine equipped with Air Ejector
6. The machine equipped with many slots on the mold plates that are convenient for mould being fixed.
