Home > Exhibition > Content

What are the requirements when using a vertical injection molding machine?

Jul 15, 2020

No matter when using something, even a simple item must have certain requirements and rules, otherwise it will bring a lot of trouble and danger. This is especially true of vertical injection molding machines that are often used in industrial production. Although this kind of equipment is relatively simple to use, no dangerous situations will occur, but it should also be noted. Because if you are not careful, there may be some unexpected situations. More often, these situations are not good.

So what should be done when using a vertical injection molding machine to prevent some unexpected situations? In fact, it is also very simple. Just make preparations before use. The preparations here include checking whether the various parts of the machine are working well. If there are problems, you should find out where the problems are in a timely manner, and then deal with these problems. And finally started working. Before this, it is better for people who operate this kind of equipment to choose some people who have operating experience. Secondly, during the operation of the equipment, do not do any adverse things to the equipment.


    Finally, because equipment such as vertical injection molding machines also have many parts, during the use process, if any parts are broken or the service life expires, they must be replaced in time. For the places where lubricating oil is needed, be sure to observe the use of lubricating oil in time. Lubricating oil is used to reduce the friction between equipment parts. The lack of this has a great impact on the service life of the machine, so this is also One of the things that cannot be ignored. In addition, remember to perform certain maintenance on the machine both before and after use, which can also extend the service life to a great extent.