Home > Exhibition > Content

Several tips for daily maintenance of horizontal injection molding machine

Jun 08, 2020

Using the correct method to maintain and maintain the horizontal injection molding machine is also to a certain extent to enable the equipment to serve us to a greater extent. Therefore, for machines that have been working for a long time, we must do a good job of maintenance and try to find and solve problems before the machine fails. For the maintenance and repair of horizontal injection molding machines, we have summarized a few small tricks in the following content, I hope you can use them.

 

    The first is the maintenance of electrical systems. The content includes checking whether the temperature in the control box is too high, which affects the normal operation of the electronic board; secondly, some forbidden areas in operation also need to be understood. For example, when checking the high-voltage components in the machine, the main power supply should not be turned on unless necessary; when changing the mold, the cooling water should not be allowed to flow into the control box.

 

    The second is the maintenance measures for the hydraulic part of the horizontal injection molding machine. The content of the hydraulic part that needs maintenance includes the sufficiency of the hydraulic oil quantity and the temperature maintenance of the hydraulic system. This requires us to constantly check the fuel level in the fuel tank and replenish it in time. As for the ideal working temperature of the hydraulic system, it should be between 450C-500C. This is because the temperature is too low, the processing energy consumption is large, which reduces the running speed; the oil temperature is too high, which will accelerate the aging of the seal and make it harden and crack.

 

    The most important point is that after the content of the equipment maintenance is determined, it is best to arrange for a person to be responsible to ensure that the determined maintenance work is effectively carried out according to the planned arrangement. Only in this way can your equipment be effective for a long time.