Precautions for use of Magnet injection molding machine:
1. Install the mold: the axial mold and the radial mold are marked, and the radial mold must be added with the magnetic conductive plate.
2. Radial magnetization or axial magnetization, wiring piles (1) and (2) corresponding to commutation
3. Turn on the magnetizing power supply and the page magnetization display is normal.
4. Turn on the magnetizing coil to cool the circulating water
5. The page magnetizing ammeter shows a maximum of 500 amps.
6. The above is normal and can be turned on.