Home > Exhibition > Content

Operation process

May 26, 2017

1. Do not want to facilitate the convenience, free to cancel the role of security doors.

2. Pay attention to observe the temperature of the pressure oil, oil temperature should not exceed the specified range. The ideal working temperature of the hydraulic oil should be kept between 45-50 ° C and is generally suitable in the range of 35-60 ° C.

3. Pay attention to adjust the trip switch, to avoid the impact of the machine in the action.

End of work

1. After the operation of the injection molding machine, the plastic in the barrel should be cleaned to prevent the oxidation of the material or long-term thermal decomposition.

2. The mold should be opened so that the toggle mechanism time is in the locked state.

3. The workshop must be equipped with lifting equipment. Assembly and removal of mold should be very careful to ensure the safety of production.