Home > Exhibition > Content

Choose right chiller to save energy

May 08, 2019

Vertical and horizontal injection molding machine under normal ambient temperature conditions, water-cooled chiller heat dissipation water condensation temperature is below 35 degrees, (air-cooled chiller condensation temperature is below 43 degrees) matching (experience judgment) .


                                                      166103584740975623

A: The first way: 1hp water-cooled chiller can be equipped with 80 tons of clamping force injection molding machine temperature control at 5-10 degrees; 1hp water-cooled chiller can be equipped with 100 tons of clamping force injection molding machine temperature control at 10-15 degrees 1hp water-cooled chiller can be equipped with 120 tons of clamping force injection molding machine temperature control at 15-20 degrees; (with air-cooled chiller matching water-cooled chiller 0.8 times, that is, 1HP air-cooled chiller can be equipped The injection molding machine with a clamping force of 64 tons is controlled at 5-10 degrees.)

B: The second way: 1HP water-cooled chiller can be equipped with a single injection quantity of 10 QZ injection molding machine temperature control at 5-10 degrees. Injection quantity 1QZ = 28.5g or more formula is the result of experience summary. In addition to the above formula, the salesman should check the actual situation and choose the appropriate chiller.

C: The matching between the chiller and the cooling tower. According to the actual actual 1HP chiller, a 1.2 ton cooling tower can take away the heat generated by the chiller.